That nearly kills the vibe and hinders your enthusiastic morning mood.
Yup, most of us have been there.
But the good news is, you can do something about it. No need to worry. This article will show you how to fix your Keurig if it won’t brew coffee.
If your Keurig is not brewing coffee, you have little to worry about since a few simple fixes will lead to it being up and running again. The problem can be for a multitude of reasons, most of them not serious at all and don’t require the intervention of a technician.
How to Fix Your Keurig No Brew Problem
There are many reasons why a Keurig will not brew. The first thing is to check for the basics.
Here are a few things you can do before you call in the expert:
The first thing you can do to make sure your Keurig is brewing properly is to check that all the parts are in place. Start from the top and proceed down.
- Check the water reservoir to ensure that it is attached tightly.
- Check the filter basket and make sure that it is properly seated.
- Double-check to confirm that the filter is installed correctly.
- The next thing you can do is check if the brew basket sits nicely in its place without falling out at any point during brewing or before brewing, when not using a K-Cup.
- Look for any water that is leaking into the machine.
2.Check for coffee grounds stuck in the heater.
The next thing in line is to check for coffee grounds stuck in the heater. The heater is what sends steam through the water, and if there are any coffee grounds in there, they need to be removed.
You can use a small flashlight to see the water pathway from the top of the Keurig down into the carafe. You can also use a paperclip to poke into the hole at the bottom of your Keurig’s water reservoir and clean out any coffee grounds that may have gotten stuck inside.
3.Check for clogged nozzle
If the water is not passing through the nozzle, it may be a sign that there is something clogging it.
The nozzle is at the bottom of the Keurig machine, and you can easily remove it to make sure there isn’t anything stuck inside of it. There are tiny rubber pieces inside of the nozzle and that’s where you need to start looking.
4.Check the pressure valve
The next thing you can do is check the pressure valve; if it isn’t closing properly, this could be causing the Keurig to spit out water during brewing.
You can easily remove the pressure valve and clean it out. Be aware that there will be some small parts, so use care when handling them. You may need to go online and order a replacement part if cleaning it doesn’t fix this issue.
Still, the Keuring won’t brew!
Time to clean all of your filters with vinegar and hot water! Rinse them with water and soap, then run several cycles to clean them all the way. If the Keurig isn’t working, you should try a different solution.
5.Use A Paperclip To Unclog Your Keurig
If the filters are clean and you still have issues brewing your drinks, you can try using a paperclip to unclog the needle. Use the same method as described above to remove the water tank and run several cycles of hot water through the machine.
6.Clogged Water Reservoir
Occasionally, over time the hot water starts to clog up in the reservoir. A telltale sign of this is that your machine no longer heats up enough water.
If you think this is happening, try running a cycle of hot water with vinegar. This will help unclog any residue in the machine and clear out the lines.
To fix this, you simply need to:
- Extract the water reservoir and wash the metal mesh thoroughly.
- For serious cleaning, use soap and water.
- Should clean all the clogged debris from the water tank.
- Once done, place all the parts back again and run the cycle.
- Simply doing this step might cause your machine to be ready to brew again normally.
Clean enclosed metal mesh in the water tank with water and detergent. Once it is dry, put it back, and hopefully, the Keurig will start brewing again.
If you’re experiencing a Keurig that won’t brew, debris might be the cause. The limescale deposits may have been deposited and not removed by the last descaling. If done.
The solution to a Keurig machine that’s spitting water and not brewing is to descale it and wait for it to completely cool down.
If none of the previous fixes worked but you’re not sure why, you could try resetting your Keurig machine, which will clone its firmware and restore it to its factory settings. When you reset, you’ll lose any custom settings you made to your machine.
To reset on a Keurig :
- Unplug the Keurig from the electrical outlet, then hold down the brew button and wait for the beep.
- Unplug it again and remove K-Cup and carafe, then unplug it for several seconds to allow it to cool completely before plugging it back in and turning it on.
- You can add a K-Cup after you turn your brewer back on.
Older Keurig machines did not have a reset button. If you want to get your machine back to its original state, turn it off and Empty and remove the water reservoir, disconnect it for a few hours.
Once we turned the machine on, if it goes back to normal then hopefully you have fixed the Keurig won’t brew problem.
To avoid most problems that cause the brewing to stop in the future, be sure to take good care of it. Descale the machine regularly, ideally every 2-3 months.
Don’t use too soft water. You can find strips that tell you the hardness of your water and if it’s very soft, consider using a different source or bottled water.
A good way to keep your devices working is to clean them periodically. That’s because many of the fixes in this article involve cleaning the machine.
If you take good care of your Keurig and you won’t have to face the problem of Keurig not brewing. The above-mentioned steps in this article can easily be applied to your device.
So did it worked for You? Leave me a Comment Below!